First Build - PSH-1 Hollowbody

[mrpearson]

The waiting for finish to harden phase normally allows you to start on the next kit....

If you still have to polish the body, the I'd get the wiring harness ready but I wouldn't install it until the body's finished. It's a lot harder to final sand and polish with pots and switches on. You get quite distinctive circular marks around them.

Hah ….. unfortunately I already built my harness. Looks like I just need to be patient and cut the grass or something


Sent from my iPhone using Tapatalk

[mrpearson]

Final coats of gloss coat have been applied to body back and face.

One more coat required on the face of the headstock. Decal is nicely buried.

Now I wait 2 weeks before I polish and start to install my electronics harness. And I need to repeat to myself daily. Be patient and don’t touch !!!!

Still waiting for my bridge locking posts to arrive which I can see have arrived from china in Sydney a week ago but still not due to be delivered to Perth for another 2 weeks. Yay Covid delivery delays.





Sent from my iPhone using Tapatalk

[Bakersdozen]

Looks lovely none the less. I think all of us are waiting for something. Either deliveries or coats to cure

[Simon Barden]

That headstock just looks sooooooo good…

[McCreed]

Nice job on the logo. I really like that.

I use my initials for my logo also, but mine is quite pedestrian. I just used a font that closely resembled Les Paul's script.
Which is weird, 'cause I'm really a Fender guy!

[mrpearson]

Nice job on the logo. I really like that.

I use my initials for my logo also, but mine is quite pedestrian. I just used a font that closely resembled Les Paul's script.
Which is weird, 'cause I'm really a Fender guy!

This was kind of an accident and I thought it looked a bit like a sound wave so stuck with it.


Sent from my iPhone using Tapatalk

[RocknRolf]

A happy 'Bob Ross' accident

[mrpearson]

Pickup tap test compete. Harness works fine for series, parallel and single coil configs. No buzz on dual single coil configuration which is a plus. And no buzz in parallel and series configs.

[mention]Simon Barden [/mention] the pure tone jack connector you recommended is a beast. There is no way my cable is ever becoming disconnected with this installed. Thanks


Sent from my iPhone using Tapatalk

[Simon Barden]

It's nice when it all comes together smoothly.

[mrpearson]

It's nice when it all comes together smoothly.

Smoothly is when I have squeezed it through the f-holes and there are no scratches on my finish and everything still works ;-)


Sent from my iPhone using Tapatalk