A 3+3 headstock wouldn't go astray either, but that's not the "style" of this kit.
The body is slightly arched, but it's flat in the right spots, through the pickups and bridge.
A 3+3 headstock wouldn't go astray either, but that's not the "style" of this kit.
The body is slightly arched, but it's flat in the right spots, through the pickups and bridge.
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Thanks. That's good to know. I still have one eye on the possibilities of that kit. Definitely has to be a string-through for me too.The body is slightly arched, but it's flat in the right spots, through the pickups and bridge.
I think I could round off all those pointy bits enough that it could make me happy.
Making the world a better place; one guitar at a time...
I guess now that I've looked at this long enough, I'm going to have to do something about it...
It's a pretty thin neck though (by design), so I don't want to reduce stability by taking too much, but it should be OK?
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
If you are careful, and pare the heel back to the line of the body without further thinning it, then you should be fine see below
Sent from my iPad using Tapatalk Pro
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Thanks FrankenWashie, I was careful
Happy with that.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Looking good!
Build #1 - IC-1 Custom Special https://www.buildyourownguitar.com.a...ad.php?t=10917
Build #2 - TLA-1 https://www.buildyourownguitar.com.a...ad.php?t=11372
Build #3 - AG-1 https://www.buildyourownguitar.com.a...ad.php?t=11661
Build #4 - PB-30M https://www.buildyourownguitar.com.a...ad.php?t=11884
Very neat. Is that done with bastard files?
PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1,TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1, MBM custom, GHR-1 (Resonator), FH-5V (Acoustic), DMS-1 (Mustang).
Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.
The little voices in my head keep telling me "build more guitars"
Yep, the half-rounded side.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Righteous! Begone, foul heel step!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Ebony grain fill time on the mahogany.
Not sure if I'll go for another black/grey effect, or something more resembling blackwood (to vibe with my Cort acoustic bass), but I'm laying down the grain for either scenario.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Reply With Quote
