Quote Originally Posted by arie_shapira View Post
i did shellac on my MBM build, i went for 10 grams shellac flakes to 100ml of ethanol, then added stain.
i let it sit for 24 hours with mixing and then strained it through mesh and sprayed it using a wall sprayer without a compressor

i did 2 coats of each color for the burst i wanted, and then i did 4 or 5 coats of clear shellac (some of them with a brush) all from the same batch.

this actually worked out quite well, and it was on an ash body that i grain-filled first
Nice work......I just want to get the hand rubbed water based dye finish I have seen so many others achieve.

I have used the shellac as a body sealer prior to alcohol based stains without any issue......alcohol is the key there I think.

I think I will have to sand the body pretty heavily and then reduce the ratio of the shellac to alcohol to even out the colour of the water based stain.