Quote Originally Posted by dozymuppet View Post
Yeah, the slurry idea I realised wasn't going to work, because I wouldn't be getting wood dust in the mix. So if anything, it was a Tru-Oil slurry, which I think didn't do any harm, but introduced some edge sanding risk.

I think there is a place for wet sanding with Tru-Oil maybe later on, like after 15 or 20 coats. However, if I've done all the grain-filling and sanding sealer work earlier on, then it should become a redundant step.

I didn't use sanding sealer in this case, and then the regular wet sand at 21 coats was primarily to tidy up some surface irregularities that I'd no doubt introduced into the finish.
Yep, lives and learns I always says!
Still, that's nice gloss you got going on there even without the final polish. Should come up a treat with very little effort.