If you're looking at the bottom of the E and E nut slots, rather than the top of the nut, it's probably all good.
Sent from my Pixel 4 using Tapatalk
If you're looking at the bottom of the E and E nut slots, rather than the top of the nut, it's probably all good.
Sent from my Pixel 4 using Tapatalk
Kit builds: JBA-4M | STA-1M | AIB-1Q | TL-1 (in progress)
Side projects: Artist TC59 | Sheoak Dreaming | Spalted Marri Metal | Randy Vs | Sassafrassin' | St. Vincent
Cheers, Dozy - I think I see what you are saying.Originally Posted by dozymuppet
As long as the bottom of the slots are right it's somewhat the aesthetics of the Low E side looking higher and if I didn't muck with the slot depth I could lightly file that higher side, just to make it look a little more uniform?
Kind regards
Posting Permissions
Reply With Quote