Results 1 to 7 of 7

Thread: Maple fretboard and tru-oil

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 31-12-2021, 04:31 PM #1
    Trevor Davies
    Trevor Davies is offline
    Moderator Trevor Davies's Avatar
    Join Date
    May 2020
    Location
    Perth
    Posts
    1,765
    I finally got my maple neck and fretboard. So I thought I would add an example for this thread.

    The fretboard was given 4 thin coats of tru-oil. Lightly sanded back with 2000 g sand paper. I had to re-polish the frets to remove the tru-oil and make them shine again.

    The headstock and neck have been given 10 coats of tru-oil with a light 1200 g sand after the 5 and 10th coats (and are looking quite glossy).

    I will give the headstock a few more coats to embed the vinyl logo.
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: IMG_1230.jpg  Views: 190  Size: 152.0 KB  ID: 42234  
    PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1,TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1, MBM custom, GHR-1 (Resonator), FH-5V (Acoustic).

    Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.

    The little voices in my head keep telling me "build more guitars"
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules