AES-1 Special

[Simon Barden]

Nice work.

In case you haven't, have you checked that the string path from the two E tuners to the nut doesn't catch on the sloped ends of the cutaways? If you need to remove a bit more material to fix this, better to do it now than later.

[DarkMark]

Nice work.

In case you haven't, have you checked that the string path from the two E tuners to the nut doesn't catch on the sloped ends of the cutaways? If you need to remove a bit more material to fix this, better to do it now than later.

I’ve checked that again and again and again.