Quote Originally Posted by ChrizK View Post
Did you do the laser printing yourself? I have a graphic that I would like to put on the pickguard fo my TB-4 but have no idea how to do this!
Hi Chriz,
Yes I did do it myself. It must be laser printed (not inkjet). Just printed the image on normal paper. Covered it with packing tape (clear tape - we call it sticky tape in Oz!). Cut out the shape. Placed it in water for 10 minutes. Carefully rubbed the soggy paper off the tape under gently running water - making sure all the paper was removed and not to rub the printed part too much. Stuck it on the pick guard. Wiped off as much moisture from under the sticker with tissue paper. (Some folks then clear coat the pickguard to help it stay put).

I think there is also a forum discussion on this!

I'm not sure if it will last very well. Saying that, my Firebird logo still looks good after 6 months. I also used it for the logo on my pine wood explorer (it did take quite a few coats of tru-oil to cover it!!)