Quote Originally Posted by FrankenWashie View Post
The kit piezo is actually one that has Six separate cells on it. You can see them through the covering.

Might need to look at alternatives or see how involved the other processes around them are. I have room for a small PCB etc in the recess behind the cone so that is all doable.
You can cut the ones with the individual piezo elements too. In fact if you did it carefully you might be able to split the rod and rewire the bit you cut off for the other half of the bridge. Should all just be wired in parallel giving you just two wires.

https://www.cigarboxguitar.com/knowl...t-a-rod-piezo/

Sent from my LG-H930 using Tapatalk