Hi Alkay, just finished off my two F styles and sadly had to use copper snail tape in the control cavities to get rid of some buzzing therefore conductive shielding paint was a fail on the single coil PUP versions but worked fine on both Explorer shapes loaded with humbuckers.Originally Posted by Alkay
Suggest getting all your top coats done before doing the shielding paint and if that doesn't work out so good, just add a bit of copper tape to a section at a time until buzzing, if any at all, disappears. On my J Bass I only had to add copper foil tape immediately beneath volume pots & output socket which saved me having to remove PUP's unnecessarily.
Reply With Quote
