Hi Buddy, like the look of the finishing rotisserie. Reminds me of a kebab shop haha.

Be careful not to apply too much as hanging vertically will naturally cause runs if coats have been overloaded. Suggest at least 6 or maybe 8 coats of TO before first sand back with 0000 steel wool or fine grade wet and dry as the layers are so thin and very easy to sand things back to bare wood without realising it. The upside is you can put another coat on after 6 - 8 hours depending on how warm the drying environment might be. On some of mine I would put a coat on in the morning before leaving for work and another upon arriving back home before settling down for an evening meal.

Whilst there are many more coats it does take around 3 weeks at least to finish things off properly as you will need to sand it back at least 2 or maybe 3 times before the final wet sand and applying the car polish if you are chasing that super shiny glassy look. Best to leave it for at least a week or more for the very final coats to harden up ahead of the final wet sand and polish.