The less well known/publicized art of Bass amps...

Marcel

Well-known member
A few beers with a couple of bass player friends made me realise how little is known by so many about bass guitar amps, myself included. The misconceptions, the beliefs, the rumours and whatever ... While there are literally dozens of reviews on YouTube on every model of Hughes & Kettner, Orange, Marshall and Fender guitar amp on the market there is also an apparent near vacuum of info on bass cabs and amps...

While it doesn't take long to find some very basic info like power should be above 250W and a 4x10" cab is the most often considered ideal small venue rig, the "which amp and cab should I get" question seems to the one most often avoided. The comment of 'it doesn't matter for bass, they're all the same and DI is just as good' resulted in heated conversation, to which I have decided to turn to the brains trust of this forum for some opinions...

For reference, brand names like Ampeg, TC Electronic, Hartke, Mark Bass, Laney, Warwick and Gallien Krueger to name a few were all repeatedly mentioned in the heated discussion... on and in good, bad, ugly and beautiful terms.. and for me as primarily a sound Engineer guy it is somewhere between a newer TC Electronic rig for some tones and an Ampeg or a Hartke into a 4x10 for others, and if all else fails the ubiquitous reliable DI into the PA/recording desk.

What say you? Bass players please stand and be counted !!! For various genres of music, or for that pub/club gig, what would be your essential go to bass amp and cab rig ??
 
Being of a certain vintage I should say an effing big double stack with lots of 12s, but I have grown up as well as out.

I really can't speak for the current stuff but broadly speaking my ideal bass rig while gigging was a totally clean solid state head of around 100W RMS into a sealed 4x12 Marshall style quad box loaded with Etones with a BOSS EQ for tone shaping never mic'd live.

The H||H IC-100S served me well both indoors and outdoors, always had the volume and punch to run with a couple of SF Twins and a 1200W per side PA with a mic'd kit ( 600 a side on fold back )

Today I still have the same H||H head but prefer vented 4x10 box loaded with a mix of Eminence speakers and don't need the EQ, probably a combination of the smaller cones and different box design, not gigged with this combo but tone wise it is very satisfying and loud enough to make your ears bleed.

Back in the day when we were in the studio I always wanted the amp mic'd but all of the current stuff is DI for bass and mic for guitar.

Don't know if this helps but it is at least one opinion to take forward.
 
Most regular giggers will probably prefer something small, powerful and light. Neodymium speakers and class-D amps mean that a small package can pack a really big punch, even if they would prefer to be standing in front of a large cab. But unless you're a well-off touring band with roadies, convenience seems to overtake looks for the semi-pro bands who are gigging once or twice a week.

You may find that the six times a year giggers may prefer the larger cabs as each gig is more of an adventure and worth the extra effort, but from my experience of those doing two or three gigs a week (often with different bands), the ability to get in, set up, gig, break it all down and get out quickly, means that they invariably use something like a 1 x 12" Mark Bass combo or similar.

My bass rig is now (well once I finish putting the cab together again - there were issues with the finish that required a strip down to bare wood), a home-made 1x10" cab with a 300W 4 ohm Celestion neo speaker and a TC BH250 250W head. It's only for messing around on, but it's an easy one-hand job to pick it all up.
 
Last edited:
Yeah, the 'heated' and some what enthusiastic discussion came as a result of me recently scoring an old Eminance loaded 4x10 cab as payment for a guitar amp repair I did some weeks ago. My response to the question of what amp I was using with it had both of them rolling on the floor with laughter followed by repeated enthusiastic recommendations of upgrades to my AC18W amp build, which though not powerful enough for serious gigging I thought sounded quite good for practice as a novice bassist like me...

Sad thing is that both these guys are serious Pro gigging working musicians, Two or three gigs a week, so their advice while honest, truthful, reliably great and valuable, it is also way beyond my skill set and leans just a tad more than I'd care to spend on a 'better' amp...

The tiny in physical size TC BH250 is probably the cheapest of the bunch at about AU$450, and prices only go up rather quickly from there. A doubling of price gets into the feature set of things like built in compression and multiband EQ and an FX loop, and another doubling of price brings LPF and HPF ability in addition to a doubling or more of power. So despite only a modest growth in physical size and weight the options up are almost limitless ... A nice Mark Bass 800W unit with HPF & LPF and tube emulation and compressor sits around AU$1400, a quite pricey investment for mostly novice practice.

As they both knew I'm primarily a sound engineer/repair guy that likes decent gear (that they might be able to hire/borrow) and not a gigging musician you can only imagine what my two bassist friends were convincingly recommending I should get, and why I should get it, (Think Aguilar AG-700)
 
I have a little Ampeg Micro CL with a 2x10 cab, only 100w but enough to shake the man cave.
 
The BH250 has the tone print facility (the current mk 2 can store 2 tone prints to my Mk1's single print), so that can add a built in compressor (I use the multiband version) or chorus or phaser or distortion or trem.
 
As one does I spent a few hours late last night and quite a few hours this morning researching the subject on valuable info sources like YouTube, Ebay and Google... and then needed a little grandpa rest, so I headed into my shed for that moment of me time...

There is a lot to consider. Hours of demo videos. Data and spec sheets. Comments from trusted individuals..... Power.?.. Toneprint .?.. Eq .?.. Compression .?.. and what do I really need.... and most of all the Tone vs Cost issue...

It seems I've been down this road before, although this time I have at hand a quite reasonable 4x10" cab. On previous journeys things tended to hover around a small combo to start with, and then migrate up to a bigger setup. And at some stage I must have had ideas of building some kind of rig or another guitar amp as hiding in the back corner of the shed was a new chassis with some bits in it, being a transformer and a solid state 200W power module.... Hmmm....

As much as getting a BH250 is very tempting, For the moment I'm thinking a build my own bass amp (possibly stereo) for next to nix is for me a more appealing temptation.... A quick survey around the shed had me most of the other required parts... 3 band EQ, compressor/limiter, input gain amp, IEC socket, a Speakon connector, knobs and pots, just need to sort out a DC power supply for the pre-amp...
 
Last century I was doing 3-4 nights a week with a Marshall 100w super bass into a slant front 4x12" with celestion 25w green backs and signal running through 2 Boss DI's to the desk for when I played a Ric 4001 in stereo. Also wired up my Yammy fretless in stereo too to make it easier when swapping axes during a set.

When I was down sizing I sold the Marshall setup and bought an Ampeg and fed that into some etone 15" speakers. It was a pig. Big and heavy and sounded crap, and really lacked the warmth of the Marshall valves and 12" speakers. As a result I am not a fan of Ampeg and find them quite bland.

A bit over a year ago was wanting to buy a decent more portable bass setup, preferably combo, and the slant backed Ampegs were tempting but I ended up with a Hartke HD75w with a 12" speaker and 7 band EQ for $399 delivered. Quite a big cabinet that looks like it could be hiding a 15" speaker in there and has a fair bit of weight too. Sounds great as I tend to like a bright sound as that cuts through and provides a better stage sound, and if gigging would run through a DI and let the sound guy muddy things up for FOH.

The separate TC's and a small single speaker cabinet were tempting but combined cost was a fair bit more than a complete setup for less than $400. If money was no object, that would be the way to go as the newer heads are so small and light it is ridiculous.
 
Crikey; you blokes have some exotic gear, eh! My bass amp for many years has been - and still is! - an old ELFA 100W combo bought in Dunedin, NZ and which has served me well on the odd occasion I've been called in to do the thump'n'bump. It's a Made in Australia bit of kit, solid-state with a 15" Etone speaker and which doesn't weigh as much as the moon... a major consideration these days but also a consideration when I was young and fit; I didn't have roadies most of the time!!
 
Do they still make etone speakers? JBL was too dear and reckon most emerging pub rock bands from 70's & 80's can thank etone for providing well priced pa gear to use at the time.

Sent from my SM-A520F using Tapatalk
 
Do they still make etone speakers? JBL was too dear and reckon most emerging pub rock bands from 70's & 80's can thank etone for providing well priced pa gear to use at the time.

Sent from my SM-A520F using Tapatalk

Mr Google says currently manufactured in Bankstown here in Sydney
 
I don't gig much lately, but want to get back to it. Lately when I have, it's been outside which calls for the big guns. Growing up I had an old (even then) Sunn made in Portland Oregon, and all I wanted was a bigger one with a 2x15 cab rather than the 1x15 I had to lug around. When the Sunn head became unreliable I got a small G&K, that I have to this day. Very reliable. Small, but heavy. A few years ago I got a Carvin BX500 class D amp. I see that Carvin went out of the amp business last October. Dirty shame. I love this amp. I run it into a 8ohm system, so it's about 350W, which is plenty with my cabs. Graphic and parametric equalizer. Compression. Footswitching. It even has a 12AX7 preamp tube that I can switch in and out. Speakon or 1/4" connectors in the back. DI out. And it is light as a feather.

So for me the perfect amp would be one like the Carvin, but would have the lovely tube sound of those old valve Sunn amps. So, to get a bit of that, I run it through a Sansamp BDDI. That gives it a lovely crunch. BDDI and amp together are about 6 lbs. My back likes that much better than anything I saw as a kid. Huge transformers and valves sound great. But for my money I like class-D amps, and a BDDI or other contraption to give it a little tubey crunch. My ears are happy with it, and my back loves it.

With cabs I didn't care too much about the size but wanted them lighter than my old Sunn 1x15 with the JBL...or any 4x10 I have seen. I stumbled onto Bill Fitzmaurice cabs and have never looked back. When I play out it's parties or bars and one DR250 is plenty for that. Tuned for bass these are great cabs. To play outside I add a Titan 39 subwoofer.

These cabs are light for what they are. My DR250 is about as loud as a 4x10, but weighs about 45lbs. Contrast that with a G&K 4x10 with Neos that weighs in around 65lbs.

But I want lighter... So I have plans to build two of Billfitzmaurice's Jack12L (light cabs). These use aircraft bracing and neo drivers, and some builders have gotten them down to around 20 lbs. They are not tiny, and not quite as loud as the DR250. Still they are louder than the average 112, and two of them should be fine for anything I am likely to do. Would love to get my entire rig under 50lbs.

I put Eminence drivers into an old 2x10 cab I had long ago, and have been using Eminence drivers ever since. There are certainly drivers that are as good. But not many that are as good for the money. Lately I have been using the neos and they are amazing. It is just incredible to me that I can now build an entire cab that is louder and better than my old Sunn 1x15, but weighs less than the magnet alone in that old JBL.
 
Last edited:
I had a Bill Fitzmaurice Jack 2x10" cab that a friend had made for him, but it was very over-engineered, large and heavy. It was very loud though, if very middley. It really needed to be run with the 1x 5" that my friend kept, to get a good low end. Otherwise you had to knock the mid control on the amp back and turn up the bass and treble to get a more normal bass sound. I bought it cheap, sight unseen as it was a 2x10" and all of those I'd seen were fairly compact and regretted it ever after.
 
Bill publishes SPL charts for all his cabs, and you are right that the Jacks have a midrange bump. My DR250 has less of that, but it's not exactly scooped, either. More like flat across the mids, whereas the Jack 10s and 12s have a pronounced bump. I haven't built the my Jacks yet, so I can't really say how they'll sound yet. I mostly wanted them because they are loud and light, and I figured I could EQ to get a sound I like.

If you think the Jacks are "overengineered" you should take a look at the DRs. The Jacks are semi-horn loaded which is what makes them loud...but also part of what makes them not-small. The DRs are fully horn loaded, so the driver fires to the rear. BF Simplex cabs are more of a conventional reflex cab, and don't have the midrange bump.

The weight issue strikes me as odd. It could be that the builder used heavy ply and heavy drivers. I opted for the "light" option, which is actually a little different design. No less engineered, but much lighter. I also opted for the lightest drivers. We'll see when I get around to building it if it lives up to the hype.
 
It was this particular cab that was 'over-engineered' with much thicker ply and more bracing that was recommended. It was certainly 'solid', and about the size of a small refrigerator, and double the weight, with two 250W 10" Eminence ceramic magnet speakers in.
 
Well the published SPL curve on these says they should be a bit mid-rangy, but if the builder changed the internal volume that could eliminate some bass. They are designed with a cross over, a low pass filter and tweeters, so it's harder for me to explain why the highs weren't there. The drivers sound heavy, but not necessarily wrong for the cab. No BF design calls for anything heavier than 1/2" Baltic birch plywood, which is also the reason for a lot of internal bracing. So it sounds like the builder may have "innovated."

On my first cab I used heavy ply that I had around the house and some ceramic magnet Eminence drivers I picked up cheap. I sold it for what I paid for the drivers... $35 I think. It sounded OK, but was about the weight of a baby elephant. In retrospect I may have harmed the designer's rep. Maybe I should have burned the cab and used the drivers in something else...

Sent from my ONEPLUS A3000 using Tapatalk
 
Hmm I have had a couple of good and indifferent amps.
The worst was by far a 1980s solid state Marshall bass rig with 2x10 and 1x15 cabs. Not sure of the model, I think it was 200w.Expensive and rubbish.
50w Peavet Basic combo was a great cheap amp super clean with guitar too
1980s fender 30w open back combo was marginal, no bass response and way too quiet
Best was my '79 SVT AMPEG which was fantastic until it eventually fell apart. I had it repaired in Sydney in the early 2000s and it was never the same again. Run it through an ampeg 4x10 and a home build 1x15 with a Celestion bass speaker.
Now have a 300w ampeg solid state mini head with the same cabs, it does a really good job of copying the growl of the SVT. Bought it in the USA new 4 years ago for about 350aud and cheaper than the last repair on the SVT!
The huge downside is the ampeg cabs are heavier than a battleship. The bass player I currently play with has two fibreglass custom made 1x12 cabs and a micro head which is 1000w, the whole setup is about half the weight of the ampeg 4x 10 alone, and sounds great.
 
Last edited:
Hmm I have had a couple of good and indifferent amps.
The worst was by far a 1980s solid state Marshall bass rig with 2x10 and 1x15 cabs. Not sure of the model, I think it was 200w.Expensive and rubbish.
50w Peavet Basic combo was a great cheap amp super clean with guitar too
1980s fender 30w open back combo was marginal, no bass response and way too quiet
Best was my '79 SVT AMPEG which was fantastic until it eventually fell apart. I had it repaired in Sydney in the early 2000s and it was never the same again. Run it through an ampeg 4x10 and a home build 1x15 with a Celestion bass speaker.
Now have a 300w ampeg solid state mini head with the same cabs, it does a really good job of copying the growl of the SVT. Bought it in the USA new 4 years ago for about 350aud and cheaper than the last repair on the SVT!
The huge downside is the ampeg cabs are heavier than a battleship. The bass player I currently play with has two fibreglass custom made 1x12 cabs and a micro head which is 1000w, the whole setup is about half the weight of the ampeg 4x 10 alone, and sounds great.

Was it a CL or VR version of the SVT Andy? Do you still have it?
The current SVT-7PRO that pumps out 1kW of bass grunt with tube front end goes for $1500... An all tube SVT that pushes 200W into 2 ohms starts at $3k... As desirable as either is both are out of my league...lol
 
Err I'm not sure, in spite of living with it for 20+ years! Currently it sits in the garage at my sister in law's place for the last 6 years or so...
It is 350 watts I'm sure, and I never wound it right out to se how loud it would go
 
Err I'm not sure, in spite of living with it for 20+ years! Currently it sits in the garage at my sister in law's place for the last 6 years or so...
It is 350 watts I'm sure, and I never wound it right out to se how loud it would go

Oh...my.... Sister in laws garage !?!
That's one valuable (and probably rare) amp to have sitting idle... If not using it I'd be putting it on Reverb or on consignment at a local music store, or are you hoping its value goes up...lol.
 
Back
Top