The DPZ-4 Sinosauropteryx Bass Build

lunaticds

Member
So, I've ordered the DPZ-4 "Zebra Wood" P Bass style kit (currently back ordered) - yet another for my JurassicAxe collection.
https://www.pitbullguitars.com/shop...z-4-electric-bass-guitar-kit-zebra-wood-copy/
The plan at this stage:
Rosewood fretboard
Black hardware, so it should come with a black pick guard. Would have preferred it didn't have such Fenderisms but it is what it is.

Upgrades: Immediately - none. I'll probably replace the kit pickups before it's finished and the tuners will get replaced. I'll stick with passive. Not sure if the Toneriders are good all rounders or if I should spend the money on something like some SD quarter pounders or the like. Just not this week. I just replaced the second fridge that keeps my drinks cool and hides the delivery from the butcher when I'm planning on firing up the smoker, but I digress. The nut will become tusq. I really can't take to the colour of bone nuts.

Colour: I'm planning on trying some Colortone on it. I've got enough Green and Red Mahogany coming to do the job. The only big question is which one? Until I see what this "zebra wood" looks like up close I don't entirely know which way I'll go. The green might be interesting. It's something that I'd been planning on trying with either a spalted maple or quilted top, but this "zebra wood" looks different. It might also just look ludicrous, so the red is my backup. Happy to hear some opinions on this one.
Plan is to finish this one with some Tru-oil. I haven't enjoyed too much dealing with clear coat on the Jurassicaster build, but working with Truoil on the Thunderaptor was pretty good.

Art: I've been prone to jamming a JurassicAxe logo somewhere on everything I've built and the guitar name on the headstock. This'll be no different. Headstock will probably be left plain maple and will somehow have "Sinosauropteryx" printed on a waterslide decal and the the JurassicAxe logo in the ball at the end of the headstock (going with a traditional Fender shape). As to whether I coat the headstock itself in TO or Poly remains to be seen. I know I can bury the decal a lot faster with the Poly, but there is the extra effort involved in getting that looking good.
I'll make a decision about where and if i put the logo on the body once the colour is on and I can tell if it'll even be remotely visible. That'll depend a lot on how the colour interacts with the colour used to darken the wood.
 
Nice idea!
You can get rid of much of the fender pick guard, just leaving enough to mount the electronics. You can even leave the hole where the pickups go exposed, to show more of the finish and stripes…
I’d consider replacing the machine heads, I’ve had much less success with the bass than guitar ones, makes sense with the tension on them I guess. The all parts ones are well priced and work, the wilkinsons the same.
I’m happy with the tonerider bass pickups I put in my last project, although I haven’t been able to use them in anger yet. I’m used to dmarzio model P.
 
As the body wood is a fabricated wood and the stripes are a result of dyeing/staining in the manufacturing process, I have my doubts as to how well it will take more staining. All the builds I’ve seen so far have just put clear over the body.

I’m wondering if the body wood is very composite-like with a lot of glue or resin holding wood fibres together, much like an engineered fretboard. In which case staining may not work well or look very patchy. You only really have the control cavity to do any test staining on, which isn’t easy, but I’d certainly give it a go.

I’d be tempted to use a coloured lacquer rather than a stain, as that will happily sit over the top of the wood.
 
Nice idea!
You can get rid of much of the fender pick guard, just leaving enough to mount the electronics. You can even leave the hole where the pickups go exposed, to show more of the finish and stripes…
I’d consider replacing the machine heads, I’ve had much less success with the bass than guitar ones, makes sense with the tension on them I guess. The all parts ones are well priced and work, the wilkinsons the same.
I’m happy with the tonerider bass pickups I put in my last project, although I haven’t been able to use them in anger yet. I’m used to dmarzio model P.

Yeah, thinking that guard is my plan B. Plan A might be printing something that only covers the wiring rout. Much more minimalist and much more timber showing.
Those machine heads are definitely on the "to go" list. There are some parts I'm 30 years past skimping on, and that's one of them.
The Toneriders I'll definitely keep in consideration then. I can't really justify pouring a grand into a $200 kit... I did that with the Thunderaptor already :P
 
If you want to try something else, I have been using dmarzio model p for decades. Amazing for rock, great through the Ampeg, really growl. Only $130 or so. I was nervous with the tonerider, but will see how they go, they sound good so far.
 
As the body wood is a fabricated wood and the stripes are a result of dyeing/staining in the manufacturing process, I have my doubts as to how well it will take more staining. All the builds I’ve seen so far have just put clear over the body.

I’m wondering if the body wood is very composite-like with a lot of glue or resin holding wood fibres together, much like an engineered fretboard. In which case staining may not work well or look very patchy. You only really have the control cavity to do any test staining on, which isn’t easy, but I’d certainly give it a go.

I’d be tempted to use a coloured lacquer rather than a stain, as that will happily sit over the top of the wood.

How the staining might take is something that had occurred to me. The website doesn't give a whole lot of guidance on the subject.
I'll give the cavity/neck pocket a go and see how they handle the Colortone and see what happens before I get too carried away. I'll keep coloured lacquer in mind as an option if the Colortone doesn't look to work.
 
If you want to try something else, I have been using dmarzio model p for decades. Amazing for rock, great through the Ampeg, really growl. Only $130 or so. I was nervous with the tonerider, but will see how they go, they sound good so far.

I've never really paid any attention to DM's before. Might be time to add them to my list for consideration. I might wait on that until I see whether or not I can actually get a finish on this body :P
 
Ha! Dmarzio are used by lots of rock bands back in the 80s, they have a high ish output. I really like them, Seymour Duncan make something very similar, can’t remember the name though
 
Not just back in the 80s. Ibanez use DM on their high-end models. DM make a similar wide range of pickups to SD. I’ve used a couple of their guitar pickups recently and they’ve been very good. Probably better marketing on SDs part that has made them more well known, along with less stores stocking DM (which ties in with marketing and so popularity).
 
Nice to hear you like them Simon. I’m looking forward to how the tonerider stacks up against the DM, my ear is really trained to hear that sound nowadays. Probably why I struggle with the tone on my stingray, although it is amazing to play
 
If you are looking for a classic tone, the EMG Geezer Butlers are hard to beat and should be priced comparably to the DM. If you want a bit higher output and more like a quarter pounder, I am really liking these

https://epiccustomshop.com/product/black-gold-for-p-bass/

They are cheaper than any new SD, DM or EMG pups, but it's a small shop and shipping may be the deal breaker.

Sent from my ONEPLUS A3000 using Tapatalk
 
If you are looking for a classic tone, the EMG Geezer Butlers are hard to beat and should be priced comparably to the DM. If you want a bit higher output and more like a quarter pounder, I am really liking these

https://epiccustomshop.com/product/black-gold-for-p-bass/

They are cheaper than any new SD, DM or EMG pups, but it's a small shop and shipping may be the deal breaker.

Sent from my ONEPLUS A3000 using Tapatalk

I've got a set of Geezers in my Aerodyne. I like 'em, but I wouldn't mind a little more lower end. It looks like EPIC don't ship outside of the US I'm afraid. Still, always good to know about the smaller guys in case I come across them somewhere. Cheers.
 
I have a set of Gotoh Res-o-lites in one of my basses. They are really great tuners.

For the bridge, if you are going high-mass, I have a couple of Sung Il BB404 bridges that I really like.

https://www.ebay.com/itm/371917265109

Same company that makes a lot of Wilkinson parts. They're cheaper than the Gotohs and have locking saddles. Not as vintage a look as the Gotoh's though!
 
I have a set of Gotoh Res-o-lites in one of my basses. They are really great tuners.

For the bridge, if you are going high-mass, I have a couple of Sung Il BB404 bridges that I really like.

https://www.ebay.com/itm/371917265109

Same company that makes a lot of Wilkinson parts. They're cheaper than the Gotohs and have locking saddles. Not as vintage a look as the Gotoh's though!

I'm a pretty big fan of Gotohs in general. I find a $100 set of tuners on a guitar reasonable. Not so much when they cost more than the guitar is worth :)
Never heard of Sung Il before, but it seems that they're pretty good. Only gotcha for me at the moment is that I'm not finding anywhere in Oz that sells them. Definitely keeping an eye out on their gear for future builds. Shipping from the US at the moment is horrendous. My last build was left sitting a month after it was complete just waiting on pickups... and I had them ordered early!
I can see some of their bridges landing on my builds.. possibly even being retrofitted into my Yamaha which could do with some TLC.
 
I have a similar bridge on my RC4, it’s great, but I had to recess it into the body a bit to get the action correct
 
I don't know how they'd work on an RC-4 kit, but they are no taller than my Fender bridges. I have one for a P-bass and one for a Jazz. No excavating was necessary ;-)

I have only seen them from internet suppliers. I've gotten them on Alibaba and eBay...right now I am only seeing them on eBay unfortunately. I think they do most of their business with OEM builders, and don't sell much to the public. There are a few shops in the US and in the UK that sell them. Not sure about NZ or Aus.
 
Playing around with prototype minimalist pick guards:

Screenshot at 2021-10-24 15-21-47.png
This was a 2 part P-Bass design that I've put together then carved up. It's not 100% but I'm curious to see how I can tidy it up. It does need more screw holes, and I was having some trouble adding more, but for the sake of seeing what I can come up with at the highest possible quality settings, this will do for now. I'm not even sure if PBG have used a standard P-Bass guard to know if these will even be close.
I suspect that my printer will struggle with the logo being so small.
I should have the first attempt printed later tonight. It's looking to be about a 12 hour print given the quality level I've sliced at.

I'm not entirely convinced that I'll want to have the finished product 3D printed - I may wind up wanting to get some pickguard material and use this as a template to carve one out. Will see once it's printed I guess.
 
Love it! It might be easier to cut from a blank, but I do like this 3d idea.
The bridge I used on the RC4A was a bit thicker and a lot heavier than the MM style bridge it came with (which went on the PB4 Frankenbass). As the RC4A is a fixed neck I was caught short on shimming it, and had to lower the bridge into the body about 2mm to get the action correct, but it came out nicely. The pics are in the link below, it looks much like this bridge, but not exactly the same.
 
...The bridge I used on the RC4A was a bit thicker and a lot heavier than the MM style bridge it came with (which went on the PB4 Frankenbass). As the RC4A is a fixed neck I was caught short on shimming it, and had to lower the bridge into the body about 2mm to get the action correct, but it came out nicely. The pics are in the link below, it looks much like this bridge, but not exactly the same.

Wow! That really came out beautifully. No chipping that I can spot around the rout!
 
Back
Top