Inkjet Waterslide decals and tru-oil

Craney

Member
Hi all,

Wondering if anyone has experience applying inkjet waterslide decals to a headstock with a Tru-Oil finish?

I understand that inkjet waterslide decals need to be sealed with a clear acrylic sealer and left for a couple of days to dry before applying the decal, but am getting mixed info about the compatibility of an acrylic and Tru-oil.

My plan was to do about three coats of Tru-oil, then apply the acrylic sealed decal, then apply further coats of Tru-oil to finish. It looks like the Tru-oil may react badly or not adhere to the acrylic?

Sorry to be a pain, I have looked at earlier posts but can't see a discussion with Tru-oil as a finish.

Thanks again,

Mike.
 
For a while I was using inkjet waterslide decals with tru-oil. After adding about 5 coats of Tru-oil to the headstock and sanding flat. I would print the decal, apply about 3 to 5 coats of Tru-oil (at the same time as the headstock coats), let it dry, cut out the shape, soak in water and then apply. Leave it for about a day, for the water to evaporate, then apply more Tru-oil coats to the headstock until the decal edges were "hidden".

I would not worry about the acrylic on the decal! I did not have any issues with the Tru-oil adhering to the decal.
 
Hi Trevor,

Thanks for getting back to me. Just so I'm sure, you actually used the tru-oil to seal the decal, so no need to use the acrylic at all?

Thanks again,
 
Yes, I sealed the inkjet printing with Tru-oil. And I was using inkjet waterslides (not laser printed).

A few tips: I would normally print out a couple of "spare" decals as backups (since they can be damaged easily). When cutting out the decal, try to leave as small an edge as possible - since this is the part that needs to be hidden by final coats.

Found this from an earlier build: Build #6 - TLA-1.

PS: I now use vinyl stickers cut with a Cricut Joy.
 
Last edited:
Thanks again Trevor, your help and advice is fantastic.

Can't believe what I've learnt in the past few days!

Go well,
 
I have never used TO on a build, but I did think about it for my first build. I corresponded with the mfg and asked them about it. They told me to test it and see, with the caution to make sure whatever is under it is COMPLETLY cured and dry. I did that, and it worked fine.

I did it like TD, except that I didn't spray the TO, I wiped it on....and because of that I did not spray the inkjet-made decal with TO, I used an acrylic fixitive. I use overnight with water based finishes, but if you don't fix the decal with TO, I think I'd wait more than overnight before applying TO over the decal.
 
Hi fender3x, thanks for that.

I'll let everyone know how I go when I get to applying the finish. Could be a bit of a slow process getting there as I'm busy sanding and preparing the neck & body, and the Cairns climate isn't helping. My work area is in the double garage, but not air conditioned and this morning it was 28 degrees at 0700.

Happy days,
 
I do not spray the Tru-oil. I wipe on the Tru-oil - using a small piece of folded lint-free cloth, or a "French polish style Rubber" pad. I Gently add the TO straight onto the decal. I never had any issues with the colour running or smudging.

When Tru-oiling the body - I will brush on the first couple of coats as it gives a thicker coat, and it is gentler on the stain (and does not shift the stain to the same extent as wiping-on with a cloth).
 
I also do most of my building in my garage...but even though it's not as close to the equater as you, it is way to hot to do it most of the year here in Miami. Very happy to have AC ;-)

I didn't know that TO would not disturb the ink on a decal. I always end up printing several decals to get just one that's useable. I find that even the printing process can smear them, so I treat them very gingerly. TD's method sounds better than mine ;-)
 
Hi Fender3x,

The weather and humidity the past week here in Cairns has really ramped up, the garage is like a sauna.

I did suggest to my beautiful wife that an AC in the garage really would be a great idea, any thoughts how that suggestion went???

I will keep trying though!!

Mike.
 
Back
Top