Haven’t been around the forum for a while so hope you are all groovy.
Doing my take on a Memphis 335 and basically anything I could have done wrong, I have. But hopefully I’ve learned a few things.
I followed a YouTube video on wiring a 335 style hollow body, using braided wire (ie the outside braiding was used to ground all the pots with the inner hot for the bridge pot).
Tried a tap test but unfortunately nothing. The wiring diagram on PB is for modern wiring (ie caps on tone pots) but I did the 50’s style (ie capacitor from vol to tone).
Can anyone suggest some trouble shooting options/reference materials to review? I have a basic multimeter.
I’ve done my best to photo.
Cheers and thanks in anticipation.
Sent from my iPhone using Tapatalk
Last edited by Johnny Bravo; 05-01-2023 at 09:39 AM.
Reply With Quote