Bluesmartyboy - first ever build TLA-1 with Maple fingerboard....

[Bungee]

Hi BSB, from memory some other forumite upgraded to a Wilkinson bridge and the bridge plate is a bit shorter so expect a bigger gap between bridge plate and pickguard.
Pretty sure he swapped the saddle screws for longer ones to achieve intonation.

The tele kit bridge pup cavity have been in the wrong position since day 1, they are about 5mm too south

DB hates TO mainly the dangerous chemicals in it and down the track it can crack and turn to a yellow colour. I'm still waiting for this to happen on many of my builds, no signs yet (touch wood)

Yes, there was a bit of mucking around to get the wilkinson bridge to fit. The PBG saddle screws give you the intonation.

I am still building mine! Life got in the way

[Bluesmartyboy]

Thanks Bungee......Good luck finishing the build....

Yes, there was a bit of mucking around to get the wilkinson bridge to fit. The PBG saddle screws give you the intonation.

I am still building mine! Life got in the way