My First Build the GR-1SF

[ShazzRandom]

I've never thought about doing this, but I always assumed you would take the metal pickup cover off first so the wax could get around the coils better.

I assumed the same! But the metal was spot welded on the back and as I don't have a welder I didn't risk separating them! That's why I sat them in for around 10 mins so the wax could penetrate as much as possible

[keloooe]

I assumed the same! But the metal was spot welded on the back and as I don't have a welder I didn't risk separating them! That's why I sat them in for around 10 mins so the wax could penetrate as much as possible

Hey Shaz, it's actually just soldered on, take a very fine Japenese saw to it and it should split right up and then just heat the solder back up to reseal it

[ShazzRandom]

Hey Shaz, it's actually just soldered on, take a very fine Japenese saw to it and it should split right up and then just heat the solder back up to reseal it

Ahh ok, I thought it was a weld. Atleast i know for next time now