Results 1 to 10 of 36

Thread: Coolangatta Gold plus a top coat.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 31-05-2015, 10:07 AM #4
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hi Rabbitz, what kit/wood is this going on ?
    I found about 5 coats of butterscotch was enough and put a few tru oil coats over did darken the colour a little.
    You will know when you get enough coats on. You will find Dingotone may darken a little as it cures. So wait a few days before you decide to start clear coats.
    This is a LP-1M with the grain popped with black, about 6 coats Coolangatta gold and about 6 coats of TO
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: front close resized.jpg  Views: 379  Size: 59.8 KB  ID: 3325  
    Last edited by wokkaboy; 31-05-2015 at 10:12 AM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules