ahhh nice. the pickups should be delivered soonish, so will do a final check when they are delivered but seems like it will be OK.
now there are some updates![]()
have done the initial sanding of the kit and have done the fret leveling and have opened a cavity for the battery (with a Dremel and drill... so might not be the best work ever)
Now, I am going to glue the neck, fill the gaps between the neck and cavity (to have a smooth finish) with wood putty. and if time allows will do the grain fill.
But, during the mock build I did notice that the neck heel has two diferent surfaces, at an angle, and depending on where I clamp, I will get a different neck angle... so not sure which way it should go.
Feels like once fully installed it would be better to have the one where the strings are just 1 mm away from the frets (as I could raise the bridge). but would be nice to get some advise.