Quote Originally Posted by Drashkum View Post
https://youtu.be/k-8P-P4JtzQ

One of my friend who owns a timber business gave me this catalogue of mini veneer sheets which he doesn't use anymore. It containers small paper thin veneer sheets of various woods totally 144 in number. Some are dyed and some are natural. These veneer sheets are 0.68mm thick and are 13 cm x 10 cm size. Do u think I can use this and fill up the gap. The wood I used previously from spoon was 1.64 mm. So i may need 3 of these strips to be glued.

How to go about it? Can you brief me a step by step guide or can you refer me to a video please? How do u make a wedge out of them?

Thank you
Drashkum



Sent from my NE2211 using Tapatalk
That would work fine. Measure the total length of the wedge you wish to make and cut one piece to that length. Then cut another 2/3 of that size and the final 1/3 of that size. Then you basically arrange them and glue together so it looks like steps. Lay them all together so they line up and one end and you will get a gradual wedge shape.

Sent from my Pixel 6a using Tapatalk