Thanx guys
got this done today used RIT yellow dye and a little warmer for the burst, the burst on this was a real pain it kept bleeding into the yellow making it too harsh, I did the yellow and used a binder over it but still kept bleeding, did the yellow and then 2 coats of clear to seal the yellow then I shot the burst, I'm thinking the mahogany wood was like a sponge, the other strat I haven't a plan for yet I did a matching front of the headstock the same but might go with a bit darker on the burst, not sure if I will go over it with lacquer or 2k clear see what it's like when I get there, for those interested I used a small touch-up gun with 1.0mm needle with the fluid almost off with 8 psi at the gun anymore it was way too much fluid still would have liked it more subtle it is possible I may redo the burst, but give you an idea where im heading with this bugger
Reply With Quote