Water based paint. SMH. Of course it raised the grain just like if I had done the old “run a wet cloth over it” trick.

I did another light coat… so tomorrow I’ll see if it’s dry enough to sand off the little sticky up bits. Hopefully I won’t lose too much purple if I do it lightly and carefully.

I kinda wish I had just stuck with hand painting. It was so much easier to do, hah.

I also need to try a test with spraying the Rust-Oleum Clear over that Liquitex to make sure nothing bad is gonna happen. If that’s not gonna work, I am not sure if it’ll be ok with no clear coat…