Time to install electronics and touch up a few indiscretions I discovered in my finish. Just debating best approach to earth my cavities. Thinking of running a wire to harness and soldering back of the pots.
Gloss finish obtained with a final 2000 grit wet sand followed by 2x thin coats of truoil and a polish with meguiars ultimate compound.
I have tried a few times to use the micro mesh pads but no joy getting that nice gloss finish.
Painfully my decal on my truss rod cover came off when taping it down to screw my hole to fix it on but at least I can enter guitar if the month as was questioning whether the word hollowbody was a brand trademark. I still have plenty of decals to fix this later.
Reply With Quote