First Build - PSH-1 Hollowbody

[Simon Barden]

The waiting for finish to harden phase normally allows you to start on the next kit....

If you still have to polish the body, the I'd get the wiring harness ready but I wouldn't install it until the body's finished. It's a lot harder to final sand and polish with pots and switches on. You get quite distinctive circular marks around them.

[mrpearson]

The waiting for finish to harden phase normally allows you to start on the next kit....

If you still have to polish the body, the I'd get the wiring harness ready but I wouldn't install it until the body's finished. It's a lot harder to final sand and polish with pots and switches on. You get quite distinctive circular marks around them.

Hah ….. unfortunately I already built my harness. Looks like I just need to be patient and cut the grass or something


Sent from my iPhone using Tapatalk