Finally got some strings on.
One problem I noticed during the setup was that the low E string saddle on the bridge was way too high compared to the others. So I filed it down to fit the curve of a 12 inch understring radius gauge.
This was when I questioned why the 6 saddles on the bridge face different directions.
Are the curved side of the saddles all meant to be facing the tail stop? The PB ones don't. The G brand ones do.
I would assume that reslotting the saddle should be similar to the nut, and the slot should have a break angle to the tail stop? This is difficult when the saddle is face the other way.
Anyway, I rotated the 3 low string saddles around. I'm not sure if it made any difference.
Reply With Quote