DMS-4 build in Tasmania

[ross.pearson]

Here's some links that might help out

https://www.buildyourownguitar.com.a...ead.php?t=9872

https://www.buildyourownguitar.com.a...ead.php?t=9627

https://www.buildyourownguitar.com.a...ad.php?t=11103

Hopefuly what you need is in there!

[Artherium Hum]

Thanks very much !

[Artherium Hum]

Here's some links that might help out

https://www.buildyourownguitar.com.a...ead.php?t=9872

https://www.buildyourownguitar.com.a...ead.php?t=9627

https://www.buildyourownguitar.com.a...ad.php?t=11103

Hopefuly what you need is in there!

There is this bare wired section on the wires going to the switch. The fact it is bare implies it's expected that it will be soldered to something but I'm not sure.

Also when earthing to the bridge plate is it supposed to be soldered as well or just placed with bare wire? There is no obvious place to solder and being a large thick piece of metal, I'm not sure the iron will heat it enough and wouldn't it leave a visual heat damage ?