Results 1 to 10 of 31

Thread: Build No 8 SSCM-1E Les Paul Custom

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #26
    Member stansby40's Avatar
    Join Date
    Mar 2019
    Location
    Tasmania
    Posts
    93

    Assembled and Finished

    The guitar is basically finished. Who ever said that a black gloss finish was very difficult to do was right. The slightest imperfection is visible, and they are many slight imperfections. However there is also a very reflective glossy finish to be seen as well. I was going to go with Tonerider pickups but I had quite a few guitars with Toneriders so I went for the Gibson 57 classic PAF's in both neck and bridge. Keeping with the 50's style (solid mahogany body) I used the 57 classic in both positions and wired up the tone controls in the 50's style. Easiest setup I have ever done no need for fret dressing and the gotoh bridge did not need any intonation adjustment when installed. The truss rod needed a slight adjustment and the bone nut needed some slight filing down. Nice to play and I think it sounds good but I am not a Les Paul expert.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	lp25.jpg 
Views:	155 
Size:	269.9 KB 
ID:	41019   Click image for larger version. 

Name:	lp26.jpg 
Views:	153 
Size:	157.9 KB 
ID:	41020  
    Build 1 AGM-1
    Build 2 TLA-1
    Build 3 ES-3
    Build 4 TL-12F
    Build 5 ST-1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •