Is that a PBG kit? Have never seen that variant on the website, unless it's super old...Originally Posted by KiMT
Spalted Maple LP kit
Body: mahogany, spalted maple
Neck: mahogany, rosewood
Hardware: Gotoh
Electronics: Gotoh, kit P90's
Finish: metal & paint (front), black keda dye & tru-oil (back)
Neck work was so good I could achieve super low action (0.2mm at 1st fret & 0.5mm at 12th fret) with no fret buzz.
Plays and sounds amazing!
Reply With Quote