Results 1 to 10 of 56

Thread: First build. SG 1

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 25-03-2019, 12:38 PM #1
    Woltz
    Woltz is offline
    Mentor
    Join Date
    Aug 2018
    Location
    Perth, Australia
    Posts
    537
    Quote Originally Posted by Tomtom View Post
    I am just worried about the angle. Should I just glue it flush with the cavity? I thought if the hardware was all on I could see if the strings were nice and level.

    Sent from my SM-G950F using Tapatalk
    Are you referring to the angle of the neck relative to the top of the body?
    Build #1 - TLA-1Q
    Build #2 - Scratch Thinline Tele
    Build #3 - Scratch Rickenbacker 330/12
    Build #4 - Scratch All Aussie Timber Strat
    Build #5 - 1st Violin/Fiddle

    Pedal Build #1 - Aion Gale
    Pedal Build #2 - Aion Aurora
    Reply With Quote Reply With Quote
  2. 25-03-2019, 01:03 PM #2
    Tomtom
    Tomtom is offline
    Member
    Join Date
    Jan 2019
    Posts
    38
    Quote Originally Posted by Woltz View Post
    Are you referring to the angle of the neck relative to the top of the body?
    Just making sure when the neck is flush with the cavity that this is the correct place to glue it. Would be easier if hardware was installed maybe? Then I could get more of a visual. I'm hoping that the factory cuts/cavity etc. is ready to go without adjusting.

    Sent from my SM-G950F using Tapatalk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules