I am just worried about the angle. Should I just glue it flush with the cavity? I thought if the hardware was all on I could see if the strings were nice and level.
Sent from my SM-G950F using Tapatalk
I am just worried about the angle. Should I just glue it flush with the cavity? I thought if the hardware was all on I could see if the strings were nice and level.
Sent from my SM-G950F using Tapatalk
Are you referring to the angle of the neck relative to the top of the body?Originally Posted by Tomtom
Build #1 - TLA-1Q
Build #2 - Scratch Thinline Tele
Build #3 - Scratch Rickenbacker 330/12
Build #4 - Scratch All Aussie Timber Strat
Build #5 - 1st Violin/Fiddle
Pedal Build #1 - Aion Gale
Pedal Build #2 - Aion Aurora
Just making sure when the neck is flush with the cavity that this is the correct place to glue it. Would be easier if hardware was installed maybe? Then I could get more of a visual. I'm hoping that the factory cuts/cavity etc. is ready to go without adjusting.
Sent from my SM-G950F using Tapatalk
Posting Permissions
Reply With Quote
