Page 6 of 12 FirstFirst ... 4 5 6 7 8 ... LastLast
Results 51 to 60 of 119

Thread: Tommy's JZ-1 Build

  1. #51
    Wired everything up except the pickups today. I put wires on for the switch and ground though, so I could test if the circuit worked. It seemed to? This surprises me, so we’ll see when it’s actually on a guitar.

    Once I have determined if the pickups are identical or not, I will solder them as well.

    I finished off the can of clear today, so that might be where I leave the “painting” stage. I’ll decide if I need another can tomorrow after it dries a bit.

  2. #52
    Got another can of clear anyway. Couldn’t hurt.

  3. #53
    Overlord of Music Sonic Mountain's Avatar
    Join Date
    Jul 2017
    Location
    Toowoomba, Qld.
    Posts
    3,261
    Just give it plenty of time to dry out properly. If the coats get too thick your run the risk of a new coat wrinkling the finish. Rustoleum really needs some decent drying time.
    Build 1 - Shoegazer MK1 JMA-1
    Build 2 - The Relliecaster TL-1
    Build 3 - The Black Cherry SG AG-1
    Build 4 - The Sonicaster TL-1ish
    Build 5 - The Steampunker Bass YB-4
    Build 6 - The Howling Gowing ST-1

    "What I lack in talent I make up for with enthusiasm"

  4. #54
    Hrm... good to know... Maybe I'll quit while I am ahead, haha!

  5. #55
    Ok. Multimeter says the pickups are the same. I guess that makes it easier.

  6. #56
    I haven't used Rustoleum on a guitar, but I've used it a lot on other things, and +1 for Sonic's suggestion of letting it really dry. I'm a big fan of their products though - lots of thin coats have always given me great results. You've picked a killer colour too - looks great against that pickguard
    #001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
    #002 (WL-1)
    #003 (MPL Megacaster - semi scratch build) [finished]
    #004 (ST-1 JR - Arachnoid Superhero build) [finished]
    #005 (LP jr)
    #006 (TL-1A)

    Junk shop acoustic refurbs (various)
    'The TGS Special'

  7. #57
    There's one thing I haven't tried yet that I meant to as soon as I got the kit... I wanted to see how close a real Jazzmaster pickguard comes to fitting. I have the gold anodised one that came off my J. Mascis Squier, but I can't remember where I put it (somewhere "safe", as always).

    I am nearly 100% sure it wouldn't fit since the JZ-1 has an angled TOM bridge, but it'd be interesting to see how close it was. It'd be a lot easier for me to modify a JM pickguard than to cut a custom one from a blank.

    This is a long way of saying that although I actually think the tort looks good, my real ultimate goal would be mint or white.

  8. #58
    Member Grubsta's Avatar
    Join Date
    Nov 2017
    Location
    Sunbury,Victoria
    Posts
    283
    Love the color tommy really nice choice

    Sent from my SM-G930F using Tapatalk

  9. #59
    I wish I had taken this pic with the hardware mocked on as well.


  10. Liked by: OliSam

  11. #60
    Overlord of Music Andy40's Avatar
    Join Date
    Oct 2015
    Posts
    3,913
    looking good, surftastic!
    Build #1 - ST-1 - Completed
    Build #2 - LP-1SS - Completed
    Build #3 - TLA-1R - Completed
    Build #4 - SGD-612 - Completed
    Build #5 - ES-1G - Completed
    Build #6 - STA-1HT | Completed
    Build #7 - ST1JR - Completed
    Current Build #8 - JBA-4
    Build #9 - Semi-scratch build Tele x 2 - Completed
    Current Build #10 - PRS-1H
    Current Build #11 - AGJR-1 - Completed
    Current Build #12 - ATL-1SB
    Current Build #13 - GST-1
    Current Build #14 - FBM-1

Page 6 of 12 FirstFirst ... 4 5 6 7 8 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •