Results 1 to 10 of 42

Thread: My Radial Tonebone Hot British Pedal

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Overlord of Music kimball492's Avatar
    Join Date
    Feb 2013
    Posts
    2,079
    Doc I know when a Digi 002 is connected that the FireWire light doesn't light up, until it boots into pro tools.
    Not sure if it's the same with other DAWS but worth a check connect it up open your favourite DAW set it up your DAW in your software see if FireWire light comes on then. Worth a try

  2. #2
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,552
    Quote Originally Posted by kimball492 View Post
    Doc I know when a Digi 002 is connected that the FireWire light doesn't light up, until it boots into pro tools.
    Not sure if it's the same with other DAWS but worth a check connect it up open your favourite DAW set it up your DAW in your software see if FireWire light comes on then. Worth a try

    I actually tried that a few times yesterday, I tried it with FL Studio and the led did not light up and there was no sound, what did happen was that my PC started locking up and I had to do a hard reset to get it running again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •