Well, some not so good results. The last coat of intensifying seems to have been affected (I am assuming) by the Sydney humidity. I left it all nice and smooth and shiny, now it looks like there are little bubbles and sand loosely scattered over the top with some orange peel affect in there.
Not sure what has happened. I rubbed back the last coat with 0000 DT steel wool so it was all even, blew off the wool dust with a compressor and wiped down 3 times with rags and microfibre pads. Frustrating.
Looks like I will have to wait for the last coat to cure properly and will have to cut it back and start again. Let's hope the veneer survives ...


Sent from my iPhone using Tapatalk