Quote Originally Posted by dave.king1 View Post
I have an engineers rule that I notched with an angry grinder to check the neck for straightness, a stanley knife blade for a fret rocker and a metal spirit level with a machined face for a sanding bar, I run a strip of blue masking tape down the machined face and then super glue the abrasive material to that.

Does the job admirably, quicker and much cheaper to obtain than buying from the likes of Stewmac.

All available from the shed that should not be mentioned
I had a mongrel steel straight edge, a purple sharpie pen, some 400 sandpaper... and a pair of aging old eyes haha