Quote Originally Posted by Bakersdozen View Post
Just did the true bypass, triple wah (stock/Hendrix/bass wah) and LED mod to my crybaby.

Sounds great and you can change tones at the flick of a switch. The only thing I am experiencing is that the LED is constantly illuminated, albeit very dimly, when the wah circuit is off. Goes brighter when the wah is activated. And there is an audible pop when the circuit is activated.

Currently troubleshooting this, but open to suggestions if anyone has been thru the same thing. I followed stinkfoot.se for the processes.
If one pole of the footswitch is used to switch the indicator led on and off, then it's possible that there might be some bad contacts in the footswitch that's causing the led to be constantly illuminated, does your Wah pedal use a 2PDT, or 3PDT footswitch?, you can check the contacts by using a multimeter set to continuity test....hope that helps.