I found a suitable nut finally. Turns out I did have one.. I need to have a big reorganise.
The pedal still isn't right though. The cog is spinning on the pot and the wah effect is intermittent. So there must be bad connections somewhere. I guess I'll keep fiddling.....
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Trying hard not to make a nut joke, sorry ManOriginally Posted by Sonic Mountain
Sounds like the Wah Pot is a bit dirty (a pretty common issue with Wah pedals since the Wah pot tends to have it's shaft rotated a lot and they wear out over time), what I would do is order a new Hot Potz of the correct value online, Realtone Music may have them in stock, I used one to replace the dirty intermittent Wah Pot in my Jim Dunlop Jimi Hendrix Wah pedal and it fixed it completely.
I just remembered that I've got a Jim Dunlop Crybaby Wah pedal that's fully working, I'll post a pic of the insides once I find it.
Last edited by DrNomis_44; 30-12-2018 at 08:50 AM.
Posting Permissions
Reply With Quote