I'm not fussed with the lack of wiring diagram. I know which wires are the middle connection (they're soldered together) and I'll see which of the others I use for ground and hot. At the end of the day it will only change which way the coils are used and as long as I set the 2 pickups the same we should be fine.

For wiring I've ordered push pull pots to split coils. I'll use them to replace the tone pots.

The vols will stay the same as now: a blend pot followed by a master vol. Works fine for me as I can blend the 2x pups with only one pot and the master vol is usually only used to mute the bass.

Now I need to find some time...

Sent from my SM-G935F using Tapatalk