Hey Ponch it was a 5-10 minute job to fit the Tonerider pup in the bridge cavity. I used a rounded chisel, I marked up the Tonerider wider mounts and carefully chiselled it out and cleaned up with a round file and sandpaper stuck to a round object
Hey Ponch it was a 5-10 minute job to fit the Tonerider pup in the bridge cavity. I used a rounded chisel, I marked up the Tonerider wider mounts and carefully chiselled it out and cleaned up with a round file and sandpaper stuck to a round object
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in