Hey Ponch it was a 5-10 minute job to fit the Tonerider pup in the bridge cavity. I used a rounded chisel, I marked up the Tonerider wider mounts and carefully chiselled it out and cleaned up with a round file and sandpaper stuck to a round object
Hey Ponch it was a 5-10 minute job to fit the Tonerider pup in the bridge cavity. I used a rounded chisel, I marked up the Tonerider wider mounts and carefully chiselled it out and cleaned up with a round file and sandpaper stuck to a round object
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Had to do a similar thing with the Entwistles I put in my J Bass.Originally Posted by wokkaboy
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Posting Permissions
Reply With Quote