Waz's TL-1AR Spare Parts Swampy Caster

wazkelly

Well-known member
Was quick enough to put my hand up for this kit being offered as a giveaway by Tony aka vh2580 before Xmas which has turned out to be a PBG TL-1AR. Just needs PUP's and for now will use some stock Chinese ones I have spare from the Blue Tele build plus Tuners which will be purchased soon and leaning towards similar stock type units from an Aussie supplier to cut down on postage time. I have some spare 500k bourns pots and orange drops, will buy an Oak Grigsby 4 way switch, Real Parts 6 saddle ash tray bridge plus a couple other minor bits of hardware. I know it might be heresy to have 500k's with single coils but they might just brighten up the stock Chinese PUP's. Always up for a bit of experimentation and shall recycle whatever I can from what has been left over from previous builds. Unfortunately the stock Tele Bridges are not good enough and the 4 way switch mod does provide another useful sound.

Initial thoughts were to do a replica of my Red J Bass but then I started thinking about a natural finish as that has been the one 'look' missing from any electric I have owned over the past 35 years.

Upon opening the box this is what I found....
photo 1.jpgphoto 3.jpgphoto 9 (mock build).jpg

What it looks like damped down....
photo 10 (wet front).jpgphoto 11 (Wet Back).jpg

Hmmm, mismatched coloured planks used has me now thinking something more dark & sinister.

I loved what Kenfu did on his LP-1S with the spalted maple top and traditional mahogany neck & body using a natural chemical wash and then Arzi produced his awesome Ash Barncaster. For this build I will attempt to do the natural chemical wash using Tea, steel wool & white vinegar and see how it reacts with Alder hoping it comes out quite dark grey/black. If it looks crap plan B has already been drawn up and plan C would end up solid black. Also have a couple of radical bling ideas in mind too, but more shall be revealed on those as we move along.
 
Waz, lookin good. I've got a bunch of PBG stock stuff you can use. I don't have a control plate but I've got all of the stock PBG tele pups, and PBG tone and volume rig and more than one set of PBG chrome tuners.
 
Waz, lookin good. I've got a bunch of PBG stock stuff you can use. I don't have a control plate but I've got all of the stock PBG tele pups, and PBG tone and volume rig and more than one set of PBG chrome tuners.

Geez thanks mate. The only standard bits I would be chasing are a set of 6 inline tuners, no hurry as they may not be required for a month or two at least. Will see if the stock 3 saddle bridge works better on this one otherwise I may have to buy another 6 saddle unit. Need to to purchase a 4 way switch and also wanting cup style jack socket and know where I can get both at a reasonable price. Really appreciate your offer Andy.
 
Last edited:
Mock build earlier tonight

Mock Build White Scratch.jpgMock Build Black Scratch.jpgMock Build Back.jpgScale length.jpgScale length extended.jpg

Apologies for the poor lighting in some shots. I really wanted to do the natural with black scratch plate however the rear shot picks up the lighter stripe that almost lined up with the neck which would have made it look like a neck through job. Looks like scale length is OK and should not require the usual 5mm additional northwards sanding out of the bridge PUP rout. Those saddles screws still have about 5mm or so travel left so pretty confident everything is all good down that end of things.
 
Geez thanks mate. The only standard bits I would be chasing are a set of 6 inline tuners, no hurry as they may not be required for a month or two at least. Will see if the stock 3 saddle bridge works better on this one otherwise I may have to buy another 6 saddle unit. Need to to purchase a 4 way switch and also wanting cup style jack socket and know where I can get both at a reasonable price. Really appreciate your offer Andy.

I'm sure I'll be up your way in the next month or so, I'll drop the tuners in.
 
If you put a racing stripe down that seam and had natural on either side you possibly won't be able to tell that the top piece of wood is that much darker. Not sure what that would end up looking like though. Maybe run a piece of black electrical tape down the seam and see what it looks like.
 
Wow, more Tuners than a long line fishing boat. Obviously not too popular but I find them ok to use.

Nice idea Fretty but I have already committed to the Dark & Sinister side of things now and looking forward to heading back into the lab (aka garage) and eagerly infuse the right amount of energy to bring this creation to life.
 
Wow, more Tuners than a long line fishing boat. Obviously not too popular but I find them ok to use.

Nice idea Fretty but I have already committed to the Dark & Sinister side of things now and looking forward to heading back into the lab (aka garage) and eagerly infuse the right amount of energy to bring this creation to life.

If its any help, I found my electrodes and Igor is keen for a sunshine coast vacation, mwah ha ha ha HA AHAHA AHAHAHAAA!
 
I've located the bridge. A few minimal scratches but string through body only which may present a new challenge

PM me if you want it your more than welcome. I've had it sitting around for at least 8 years!
a3241e3d0828440e322af9c976b861c5.jpg


Sent from Android Nougat
 
I've got a chrome three saddle top strung bridge that is surplus to requirements, if you want it PM your address.
 
Cheers guys for the offers of a bridge.

@ Ponch, I have a similar one that I tried on the Blue Tele and not too keen to attempt string through as that looks the best way for that style to work. Tried to use it rear loaded and the string angles were all wrong and played havoc with intonation.
@ Dave, I now 2 x PBG 3 saddle style Bridges and was almost going to have another attempt but ordered another 6 saddle one from Real Parts this afternoon which has sides folded up like an old ash tray design. Here it is on Bluey...
photo(5).jpg
 
Beginning of the dark & sinister side project......

Steel wool in vinegar.jpgTea brewing.jpg

Bunch of DB's 0000 steel wool from a luthier kit cut up and placed in a jar with 2 cups of white vinegar. In the 2nd Jar we have 10 Liptons Black Tea Bags infusing in 1 litre of boiling water.
 
Amazing what quick work 80 grit paper makes of this sanding job....
headstock front shaped.jpgheadstock rear shaped.jpgneck front.jpgneck rear.jpg

Started sanding the body but as I started late in the day ran out of daylight and the lamb roast was ready for carving.
 
Back
Top