The PBG B46.....Behemoth bass and guitar kit.

ozzbike

Well-known member
Lads of Lutherie,

I have been toying with the idea of having a shot at making this two neck beast. I see build threads and one photo series for the 6/12 string dual neck kit, but nothing for the 4 string bass and 6 string guitar.

I was wondering if anybody has made this kit, and if so do you have any tips?

One question straight up for me relates to electronics......there appears to be two volume and two tones, with two three position switches to control 2 x jazz bass pickups and 2 x humbucker pickups. If that is it it means that both sets of strings would be active all the time. From the wiring diagram it appears they share all the controls. I was just wondering if a better option is a third switch that selects the bass or guitar.

Thinking a solid colour spray can job for this one. Primer....base colour....gloss acrylic top coats.

Tone Riders all round...jazz bass pickups and rock song humbuckers.....bigger Gotoh pots....orange drop caps.....Tusq nuts....switchcraft input jack.....maybe crt or gotoh three way toggles.

Any suggestions and advice will be very welcome. 😀😀
 
Respect.

Haven't done this one Oz but am currently doing the SGD-612 which has three switches. Seem to work fine to me.
 
Hey Ozz good questions. I can't recall ever seeing this kit built or a build diary. The SGD-612 has 3 switches and you could flick to the 6 or 12 string using one of the switches
Hopefully your thread may get a builder out of the wood work who has built the kit.
Always been keen to see this beast built.
I doubt there is a wiring diagram may give you an answer to being able to turn either the bass or 6 string off while playing the other

EDIT there is a wiring diagram but it appears to have 3 x 3 way switches
http://www.pitbullguitars.com/wp-content/uploads/pdf/PBG16-BG-46.pdf

got to head out but will have a better look later
 
Last edited:
YAY! Been waiting for someone to take this on!
boris.jpg
 
YAY! Been waiting for someone to take this on!

Ditto.

Was tempted to have a go at this one about a year ago but ended up building 4 separate axes instead.

Sensible control wiring would have master volume & tone for each pair of PUP's and a central 3 way switch to select which neck or set of PUP's are active, with the other 2 x 3 way switches to select between the PUP's on each neck. To try and run piggy back style allowing 2 vol & 2 tone for each set of PUP's would become a mess and hard to trouble shoot if things stopped working.

Edit: Just checked the kit on PBG shop and it only has 2 x 3 way switches, not 3. Probably makes it even easier as you could roll off the master volume for which neck/set of PUP's you want to mute.
 
Last edited:
Wiring looks fairly easy to follow. Just have to get another 3 way switch and figure out where to put it as the body looks like it has only been routed for 2?

Another 'heads up' would be to grab 250k pots for the single coil J Bass PUP's and maybe a 0.022mf Orange Drop Cap and use the 500k pots for humbuckers together with 0.047mf Orange Drop Cap. If you have never done a treble bleed mod, highly recommend it and they are only $2.95 each.
 
Okay just had a look at the wiring diagram.

The Bass volume and tone are listed as the two holes in the body closest to the neck.

The Guitar V and T are listed as the two holes furthest from the neck.

Page three of the diagram indicates a third three way toggle to select Bass or Guitar or both.

So the volume and tone only work on a pickup when a toggle switch is moved. E.g. Not a volume and tone for each pickup. But you can still select neck or bridge pickup. Okay.

So I could just wire a button.....or mini toggle.....or get a couple of Forster drill bits and make another cavity. Mmmmm.

May have to ponder on this one. Like the idea though.
 
Wiring looks fairly easy to follow. Just have to get another 3 way switch and figure out where to put it as the body looks like it has only been routed for 2?

Another 'heads up' would be to grab 250k pots for the single coil J Bass PUP's and maybe a 0.022mf Orange Drop Cap and use the 500k pots for humbuckers together with 0.047mf Orange Drop Cap. If you have never done a treble bleed mod, highly recommend it and they are only $2.95 each.

I get the treble bleeds and have them on all my guitars.

After my read of the wiring diagram I had the same thoughts. J bass single coils....250k and 0.22 cap and 500k and 0.47 cap for humbuckers.

It does appear that a third toggle is the way to go. Thanks. 😀😀
 
Ozz - just checked the diagram - looks like I'll need to change it - you're right - the wiring is different to the diagram. I'll look into it tonight and get something to Ads tomorrow. Sorry for the confusion...
I'll set it up with a switch for bass / guitar (hole between the guitar and bass) and a second switch for the two guitar pickups. As for pots, I'll give it some thought... I understand that you'd want to manage vol between pickups at both the bass and the guitar.
 
It also depends on how you want the neck selection to work, and if the supplied switches are just the standard 3-way toggles or something special specific to this kit. Do you want the neck swithcing to be bass/off/guitar or bass/both/guitar (to allow you to drone one neck while playing the other)? The PBG diagram with stock switches would mean both necks are on in the middle position.

There are options that would allow you wire it with only two switches, but it depends on how you want the controls to work and how you want the neck switching to function etc. Decide on what you want to try to do and we can maybe work out a wa to do it.
 
Hey there Weirdy,

I am thinking......have to save the money for the kit and two sets of Tone Riders.....that I would like to select each of the four pick ups, and I was looking at a mini toggle.....drilled hole in the control cavity that exists......with on/off/on.....wiring choices to select Bass or Guitar.

So basically wired as per the three page PBG diagram, just add a mini toggle into the control cavity to replace the third three way toggle switch.

But all the mini toggles I can find don't carry a ground. Will that matter?
 
Did some thread surfing.....and had a look at the website of feast Watson.

I wonder how their prooftint under Scandinavian oil would go on Basswood and maple necks?

Or the prooftint stain under spray can gloss acrylic.

I think the mahogany colour on the body with golden teak on the necks may be a nice combination.
 
A 4 pole double-neck toggle switch would give you the bass/off/guitar and allow you to run 2 volume 2 tone and the pickup select toggle for the active neck. Basically, LP style wiring for whichever neck is currently active. Downside is same pots are used for both necks so it would have to be all 500's or 250's and would also be a pain if you're frequently switching between necks.

A Dano style on/off/on full sized toggle would work well as your neck selector and fit nicely in the pre-drilled hole. But, if you wanted to use a mini-toggle you could use a washer style ground lug or even just shielding tape in the cavity should ground it (assuming there's enough thread on it to body mount it).

Another option would be to have 2 x 250K vols for the bass neck, wired in JB style, and then 2 x 500K as a master volume and tone. The pickup selector would only apply to the guitar neck (and you could have the master vol only apply to guitar too) and the bass vols would control the bass pup selection. Use an on/off/on neck selector and again you only need two toggles.
 
The other issue is amplification. Do you want the ouput going to a single mono jack, regardless of the selected neck, or separate the bass and guitar output with a stereo jack.
 
Good point about separate outputs. A stereo output jack into an external splitter cable would do the trick as that is what I use on my Ric 4003.
 
Did some thread surfing.....and had a look at the website of feast Watson.

I wonder how their prooftint under Scandinavian oil would go on Basswood and maple necks?

Or the prooftint stain under spray can gloss acrylic.

I think the mahogany colour on the body with golden teak on the necks may be a nice combination.

Hey Ozz, I did a lot of testing of the F & W prooftint on some scrap pine. It can be used with or without timbermate and Tru oil goes over fine so i imagine danish oil would be fine.

I can say though that I never ended up using it as I found the stains to be a bit lacklustre. I've got several bottles of the stuff if you want them just PM me your address and I'll try to send (not sure if im able as they are a spirit based stain?)

I also faced the same problem as you with my SGD-612 in that I didn't really have the $$ to drop on four pups. instead I pulled the PBG pups apart suck an alnico5 magnet in them and have wax potted them. If I ever get to finish the build i'll let you know how they sound.
 
Thanks for the ideas mate....and tales of past trials.

1. I think this build might be awhile coming....Xmas bills are on the horizon.

2. I think that maybe a full all natural build under spray acrylic or wipe on poly maybe a chance....the NUDE DUDE.

3. This is a build for me....so the amp stuff not really an issue. Worst case a good A B pedal connected to my Bass Cube and Vox.

4. I think the Di marzio mini toggle might be for me. I have heaps of full size gotoh 500 and 250 pots here. Will have to get a DM mini and see if it all fits.

May end up with Bourne minis I think....and sadly maybe the small green dots of death caps....but still two tone bleeds going in.

5. 2 x TUSQ nuts. Tone rider Rock Song guitar pickups. Tone rider Jazz bass pickups. High mass adjustable bass bridge...GFS one looks same as kit one. Roller tune-o-magic bridge and higher quality tail piece.

6. I play Bass okay and guitar badly....but I enjoy the challenges of getting a setup onto a neck....bridge and nut to where the action and intonation are golden.

This is my ultimate man shed dream this NUDE DUDE. 😀
 
Seeing as you are in the neighbourhood would love to see the finished project, just to size up how big it really is.
 
Back
Top