Tele number Two. The one I should have built in the first place.

Rossc0

Active member
Turns out the Tele I built wasn't actually the one I wanted, still like it and it gets played but not as happy as I should be. Hence this thread.

Will be another long build, its going to be perfect this time ;), (and I've not finished the ES12G yet). How often is that said at the start, for some compromise to pop up along the way... Hopefully not this time.

Anyway here is the starting point, just arrived. A one peice ash body set up to accept vintage spec hardware.Unfinished, and made in Japan. So its going to be my tribute to a 50's tele. Hope to get a genuine Fender repo '52 neck from Stratoshere or somewhere similar. No doubt be a MIM one as I'm not spending $600+ on a made in the USA piece.

Plan is to finish in a traditional Butterscotch / Blonde colour, black pickguard. Here's hoping I get this one right.



20180721_112821.jpg

20180721_112839.jpg
 
Last edited:
Nice project as a Tele person I'll be watching this one.

FWIW. I have 52 Blackguard spec pickups in my Thinline and love them, they were a custom set made to order
 
Yes Butterscotch. My own fault, really shouldn't have tried in the weather we're currently having.
 
Turns out the Tele I built wasn't actually the one I wanted, still like it and it gets played but not as happy as I should be. Hence this thread.

Will be another long build, its going to be perfect this time ;), (and I've not finished the ES12G yet). How often is that said at the start, for some compromise to pop up along the way... Hopefully not this time.

Anyway here is the starting point, just arrived. A one peice ash body set up to accept vintage spec hardware.Unfinished, and made in Japan. So its going to be my tribute to a 50's tele. Hope to get a genuine Fender repo '52 neck from Stratoshere or somewhere similar. No doubt be a MIM one as I'm not spending $600+ on a made in the USA piece.

Plan is to finish in a traditional Butterscotch / Blonde colour, black pickguard. Here's hoping I get this one right.



View attachment 27498

View attachment 27499


So, basically like the finish on the body of my custom Telecaster then?

Custom Telecaster_Latest_resized.jpg
 
Yes Butterscotch. My own fault, really shouldn't have tried in the weather we're currently having.

You in Qld? I don't know where you are.

In any event, I usually find that it just takes longer to dry before the next coat
 
NSW, but at the moment I don't think it matters where you are. Will wait till we get a slightly cooler less humid spell. May just be I went too may coats too quickly.

You recon the Butterscotch takes longer to dry than other DT's?
 
Something Similar Doc.

Got the period correct 5 screw pick guard without the neck pickup screw holes and a 7.25in radius '52 model neck, Just need the weather to change so I can give the stain another go.
 
Take 2. In the house this time sitting under the AC running on Dehumidify. We'll see how long it takes till I'm kicked back out into the garage :-)

teleback.jpg
 
That looks great mate.

Ok so, as there is only a "stain coat" being the mix of butterscotch and white base, it takes just a little longer than a normal stain coat but a lot less than a normal intensifier coat to dry.

Look as a general rule I always wait about a week between stain coats before applying the next coat, if its humid I'll wait two weeks or more.

The thicker you put it on the longer you have to wait.

I found that once I put on each butterscotch coat it would look rad, then fade as it dried. So I'm pretty sure I put on somewhere between 4 and 6 coats all up.
 
Cheers Andy, Yes it fades a huge amount, I've got 2 on, and with having done a couple and sanded off probably don't have enough for 6, but will get another one at least.

So, no intensiter - what is the 3rd bottle that says final coat on it?
 
Cheers Andy, Yes it fades a huge amount, I've got 2 on, and with having done a couple and sanded off probably don't have enough for 6, but will get another one at least.

So, no intensiter - what is the 3rd bottle that says final coat on it?

Pretty much as advertised, its the final coat. you can skip the intensifier and go straight to that if you are happy with the colour.
Very VERY thin coats with plenty of drying time between and you should be right.
 
Okay so, they way I did it, was I kept putting the stain coats on (mix 50/50) and waited for it to fully dry before I decided whether I wanted to go darker each time. I honestly can't remember how many coats I did.

As I rule I generally don't use DT final coats. but that's just me. You have to put them on super thin, the final coats take waaaaaaaaaaaaaay longer to cure than any other coat. When you are applying the final coats they leach some stain out, which I don't like. If you muck the final coat up (ie put too much on) it weirds out and looks husky and then you have to wait for that to cure before lightly sanding off and i've never been able to do that without sanding some stain off, so then you have to blotch stain again before final coating again....which you may inevitably muck up again.

I have vowed to do my bass all in DT as a final coat....so lets see how that goes.

Look the best conditions to use DT is lowish humidity and about 30 to 35 degrees.

So I usually finish in tru oil. It's a lot quicker, finishes harder, glosses up nicely. also if you chip or ding it...you just patch it up with more tru oil.

Look I read a post that Dingobass wrote with one of the reasons not to use Tru oil (apart from toxicity), he said that it contained silica, which like ground up glass, will gum up the wood and destroy tonal elements of the wood.
 
Back
Top