Had a good think overnight I may have the tools here after all - have a dodgy circular saw - but should be good enough to rip the back bits off and cut the sides to rough shape out of a couple of sheets. Then thinking of screwing the two parts together and cutting them both at once with a jigsaw to get the cutouts to shape. Currently trying to think of how to do it with the least sheets of ply.
Current thinking - 1 sheet of marine AA ply 12 mm for the sides - Bunnings has it at 1200 x 600 lengths for ~$26. This should give me 4 sides if needed...
1 sheet of BC interior ply for bottom and top rails - these will be padded so I don't need the quality of appearance. I should get heaps of lengths out of a sheet if I am looking for a 900 mm wide stand. I was thinking to reinforce the bottom rails at least - if I'm getting a couple of basses on this, it may get a touch heavy.
As mentioned, my woodworking skills to date have been more destructive than constructive, so happy to take advice.