Then you've come to the right place, I think most guys here know that feelin. But there's a heap of answers to be had, you just gotta ask the questions and someone here will have the answer....except if the question is about understanding woman, no one has those answers.
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
welcome to the forum Mongrel, nice looking kit you scored, looks like a LP-1M mahogany body and neck. What colour Dingotone kit did you order ?
Looks like some nice flame maple on the veneer. Best early tip I can give you is don't sand the veneer much they are very thin. If you want to pop the flames with a black stain then I'd advise no pre-sanding before you apply the black stain then sand it back with 320 grit paper.
Ask any questions you have and good luck with the build. Most important stage of the build is setting (gluing) the neck so ask lots of questions.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
OOOOOh another LP build! I will eventually get around to doing one, though I should probably start finishing the others first...
Welcome to the madhouse, you've gotten a great kit by the looks of your pic. Have you any outrageous plans? Look forward to seeing it evolve![]()
Last edited by FrankenWashie; 21-07-2016 at 10:45 AM. Reason: premature clickulation.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Hi Mongrel, that's a sweet looking kit, I'm sure you're going to have fun with it.
I'm in the same situation as you with woodworking skills, and over the last month and a bit I've been managing OK by taking everything slowly, asking all the questions I can think of when I'm unsure about something, and measuring/checking things 2 or 6 times before doing anything like cutting or filing that can't be undone.
It's fun as![]()
Welcome Mongreldogma!
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Love the name mate. good to see you aboard the crazy train
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Thanks for the tips wokkaboy. I found out the veneer was pretty thin, BEFORE I read your post. No major damage just a bit see through on an edge or two. I will definitely ask plenty of questions before i stick that neck on.
Welcome Mongrel and a great looking kit!
Sent from my GT-I9506 using Tapatalk
Current Projects
#Planning 5 String Bass