Hello! This is my first post here and could really use some help :)
My father and I recently attempted to do the wiring for the TL-1 kit and seem to be having some trouble with it as we are both inexperienced. We were fairly certain that all of the wires were soldered in the correct place, however after plugging it in we had nothing. We have since unsoldered most of the joints and reattempted it a couple of times, still without success.
We had the most difficulty connecting the pickup's live wires to their respective positions on the switch. As this was a very finnicky task is it possible that one stray part of the live wire could disrupt the circuit?
(On a side note - we had to strip back the insulation on the bridge pickup wiring so that the ground wire could reach the volume pot - is this normal?)
And just to be certain, the pre-soldered yellow wire is the grounding wire that is placed under the bridge, correct?
Sorry that it's not much to go on, but any information would be a great help!
Reply With Quote
