Hi Blocka,
it would pay to start your own build diary and post your questions there.
I think Eric67 had the same issue with the bridge ground wire not being drilled. See post 10 of this thread.
As for the wiring diagram. Is it "Two Humbuckers to 2 Pots and a 3 way Switch" ?
PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1, TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1.
Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.
The little voices in my head keep telling me "build more guitars"
That’s how I found his thread, has given me much information. And good to know I’m not the only one with the issues.Originally Posted by Trevor Davies
It is indeed. 2 humbuckers, 2 pots and 3 way switch however the diagram in the website doesn’t have all the wires coming from the pickups
Sent from my iPhone using Tapatalk
Do the humbuckers have 4 wires with 2 already soldered together?
If that is the case - the two that are soldered together just need to have their soldered connection taped up (so it cannot be accidently grounded in the control cavity) and then ignored. Those two wires literally are just joining the two single coils of the humbucker together in series.
PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1, TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1.
Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.
The little voices in my head keep telling me "build more guitars"
Yep two twisted together and then two more on each pickup 4 wires each
Edit, they actually have 5 wires
Sent from my iPhone using Tapatalk
Last edited by Blocka; 29-12-2021 at 05:55 AM.
Posting Permissions
Reply With Quote