Mine had the same light section except it was on the back. Wonder if its from the same plank?
Mine had the same light section except it was on the back. Wonder if its from the same plank?
Quite very well could be sister of Blasteroid haha. My 3yo daughter has nicknamed this one "single girl". She's labelled the other ones too - Strat project is called "Minty" and "Browny Boy" is the PRS lol she hasn't seen the LP yet - neither has the MrsOriginally Posted by Richy17
I had good success with my scrap testing applying timbermate really rubbing it in, then wiping straight off across the grain with a damp cloth. Rinse the cloth in bucket of water and keep going. Letting that dry then applied FW sanding sealer straight over the top without sanding. Once the sealer dried, then I sanded back to 400grit. My idea here was to preserve the filler and seal it into the grains without pulling too much out in the sanding process. We will see how that schedule goes on the body.
Timbermate wiped:
Wet sanding sealer front and sides:
Last edited by Bakersdozen; 27-02-2019 at 03:09 PM.
Haha my wife hasn’t seen any of my kit builds yet 😂Quite very well could be sister of Blasteroid haha. My 3yo daughter has nicknamed this one "single girl". She's labelled the other ones too - Strat project is called "Minty" and "Browny Boy" is the PRS lol she hasn't seen the LP yet - neither has the Mrs
Dried sanding sealer on the top, now to do the neath
Wet sanding sealer underneath
Keen to start sanding over the next few days to see what that reveals
Last edited by Bakersdozen; 27-02-2019 at 03:49 PM.
First soak coats of TruOil on. I can see a few dust bunnies already, but will give it a run over with the white scourer and then maybe sandpaper depending on how it looks after a night. Was able to do the front and sides this morning and the back just now given the heat today in Melbourne, but I'm still going to leave it until tomorrow to do anything more given its the first coat.
No update for a while . Tru oil Tru oil and more Tru oil. Neck is coming along nicely too, but can't reveal that one yet
The red is just a reflection and the other funny looking bits in the horns are too
Last edited by Bakersdozen; 17-03-2019 at 08:13 AM.
Tru Oil, Tru Oil, Tru Oil, level and repeat.
BTW, I have found these great for single use application of a layer of Tru oil
But are they any good for removing make-up? *Asking for a friend.
2nd build GPB 4B GrainPopperBass https://www.buildyourownguitar.com.a...ead.php?t=9570
1st build JB-4 completed https://www.buildyourownguitar.com.a...ead.php?t=9319
Runner up GOTM June 2019 https://www.buildyourownguitar.com.a...ead.php?t=9527
Posting Permissions
Reply With Quote
