Hey Andrew, I do have a build diary but its a bit out of date. I've got about 10 or so builds on the go and have been testing new Dingotone colours so haven't had time to update my build diary but here's the link http://www.buildyourownguitar.com.au...ead.php?t=3073
the back sides are Feast Watson jarrah prooftint stain, a favourite !
good luck with the build, that spalted bowl looks insane
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thanks for the encouragement guys! Mock assembly tonight, neck joint is very nice and tight, can lift the guitar by the neck, just as it should be. Still got to check the measurements, but it all looks good. Started discussing headstock shapes with my wife too. Pickup surrounds are flat, not curved. No big deal, can sort it out I suppose. I'm thinking about headstock shapes partly because I figure if I cut some bits off the headstock then I can try out some samples with the dyes/timbermate.
Now that is a nice spalt.
Tony
Win on that veneer. Maybe try no pickup rings? Dont want to hide that spalting
While I'm happy with the spalt on my IB-6S, yours is really nice!
Bassist in Philadelphia, PA, USA
First build: IB-6S (Zhenya), began Nov 2014
Hmm, that's not a bad idea. It does have pretty clean routs too.Originally Posted by Nickosaurus
Thanks guys! I am stoked with the top.
If you go for a direct mount you might find you need to swap out the pup screws for wood screws (the machine screws sometimes have enough tooth to grip but sometimes it doesnt depending on the wood). You could also try using threaded inserts and that'd give the full ease of height ajustability that pup rings give. Itd be the best of both worlds cos itd be a shame to cover that sick spalt.
"Sometimes you want to give up the guitar, you'll hate the guitar. But if you stick with it, you're gonna be rewarded"
- Jimi Hendrix
My Builds:
#1: Non-PBG SG - "Purple Flame" (Getting Wired)
#2: PBG MB-1 - "The Wasp" (Getting Wired)
#3: PBG IB-1 - "V-Bay at Noon" (90% Done)
#4: PBG SG-1F - (Getting Cleared)
My Future Builds:
PBG ES-1G Custom - "Dave Grohl DG-335 Tribute"
Find me on Facebook!
https://www.facebook.com/brodie.west.9
lots of pressure man, because that is one of the best spalted kits i've seen!
Beautiful veneer. Let's see some stain on that bad boy!
But don't rush it for my sake
Posting Permissions
Reply With Quote
