The sanding job looks fine to me. Yes you will use a fair bit of it if you are doing a really thorough job, thats normalOriginally Posted by Volgar
The sanding job looks fine to me. Yes you will use a fair bit of it if you are doing a really thorough job, thats normal
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
No i don't think so sounds like you are doing everything right.
#1 JMA-1 Completed http://www.buildyourownguitar.com.au...ead.php?t=8180
#2 Non PBG LP Completed http://www.buildyourownguitar.com.au...ead.php?t=8416
#3 STR-1JR Completed http://www.buildyourownguitar.com.au...ead.php?t=8468
Ok ! I had a little fear !
I can't advance on the kit today, tonight and tomorrow, because I'm at my girlfriend's home and I must also finish my school projects (I am in a very time-consuming and demanding computer school). I'm already sick about that! haha
Last edited by Volgar; 14-01-2018 at 07:21 AM.
"Isn't funk the most beautiful creation of man?"
- Volgar, 2018
__________________________________________________ __________
#1st build - JMA-1L
#2nd build will certainly be a custom kit close to the GR-1SFG
I think I finished sanding the first layer, I went to the 320 paper, even if it is not very useful! haha
I will apply the second layer, with a scraper this time to avoid putting too much! ^^
"Isn't funk the most beautiful creation of man?"
- Volgar, 2018
__________________________________________________ __________
#1st build - JMA-1L
#2nd build will certainly be a custom kit close to the GR-1SFG
Second putty layer !
this time I used a metal spatula and a plastic scraper to avoid putting too much!
I think I’ll won a lot of time !
I finished sanding the second layer of filler!
I think I now have a pretty smooth rendering and I will be able to start putting the primer!
What do you think about that ?
"Isn't funk the most beautiful creation of man?"
- Volgar, 2018
__________________________________________________ __________
#1st build - JMA-1L
#2nd build will certainly be a custom kit close to the GR-1SFG
It looks pretty good however it is a little hard to be 100% sure just looking at the pictures. Dust it of and just inspect the whole body for anything you may have missed if your satisfied with how it looks then yes move on to the next step.
#1 JMA-1 Completed http://www.buildyourownguitar.com.au...ead.php?t=8180
#2 Non PBG LP Completed http://www.buildyourownguitar.com.au...ead.php?t=8416
#3 STR-1JR Completed http://www.buildyourownguitar.com.au...ead.php?t=8468
Looking good.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Yep, i’ll clean it tommorow evening and start to put some primer !
Here's the first layer of primer in the back !
The newt will be in two hours , but I don't know how much layer I need to put ! haha
So, do you know the grade of sandpaper i'll need to use after putting all layers ?
and the number of layers I need to put
Last edited by Volgar; 16-01-2018 at 12:33 AM.
"Isn't funk the most beautiful creation of man?"
- Volgar, 2018
__________________________________________________ __________
#1st build - JMA-1L
#2nd build will certainly be a custom kit close to the GR-1SFG
Posting Permissions
Reply With Quote
