plans sound great Tony. Just be careful with the veneer you don't sand through. You should get an idea looking from the side of the pup holes the width of the cap but it's often thinner near the edges/binding
plans sound great Tony. Just be careful with the veneer you don't sand through. You should get an idea looking from the side of the pup holes the width of the cap but it's often thinner near the edges/binding
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeh mate already got the gauges out and doing some tapping, there wont be alot of veneer there thats for sure. I am also tomorrow going to be going over it with a magnifying glass looking for glue, i have found 2 nasty pieces at the neck join on the neck itself, some goop will fix it.Originally Posted by wokkaboy
Plenty of sanding, but only light on the veneer until i get a few coats of finish on it.
Posting Permissions
Reply With Quote